
Air Spring Bag: Quality Defects & Failure Analysis 4
2026-11-10Girdle-Hoop Misalignment and Edge-Induced Rubber Damage
Symptom/Description:
• Circumferential incisions or razor-edged grooves on the mid-section convolution surface; or axial displacement and rotational misalignment of the girdle hoop during stroke compression and extension cycles.

Root Cause (Manufacturing Nonconformance):
• Stamping of carbon-steel center rings without post-process edge chamfering or mechanical deburring; or insufficient tensile stiffness in the hoop material—resulting in load-induced ovalization and loss of concentricity under operational compressive and bending stresses.
Consequence:
• Recurrent dynamic contact between the unmitigated sharp edge and the flexing rubber wall, initiating progressive cutting damage that culminates in catastrophic circumferential rupture of the bellows structure.
Quality Control Requirements / Acceptance Criteria:
• 100% post-stamping verification of edge radius compliance via visual and tactile inspection;
• Multi-axis dynamic fatigue testing under representative service loads, with a minimum validated life of 1,000,000 cycles and zero structural failure permitted.




